您好,欢迎访问无锡吉祥脚手架厂本厂主营:脚手架、移动脚手架、门式脚手架、梯形脚手架

移动脚手架

厂家直销价格实惠

脚手架厂家

老牌厂家值得信赖

全国咨询热线

137-7145-7215

无锡吉祥脚手架厂

联系我们

地址:无锡市前洲镇工业园龙潭路

咨询热线:

0510-85851922


137-7145-7215

镀锌脚手架之热度与冷镀的区别在哪里?

发布时间:2019-04-24人气:141
  厂家分享使用移动脚手架要注意的八个地方脚手架的种类型号有很多,满足不同的建筑需要,移动脚手架就是其中一种,移动脚手架虽然在使用过程中比较方便,但在使用时也有一些注意事项要特别留意,避免因为一些小问题引发大事故。随着建筑行业的发展,建筑…

无锡镀锌脚手架热度与冷镀的区别:镀锌脚手架是一种具以热轧或冷轧镀锌带钢或镀锌卷板为坯料经冷弯曲加工成型后再经高频焊接制成的方形截面形状尺寸的空心方形的截面型钢钢管;或将事先做好的冷弯空心型钢管再经热浸镀锌加工而成的镀锌方矩管。

The difference between hot and cold galvanized square pipes in Wuxi is that the galvanized square pipes are hollow square section steel pipes with square section shape and dimension made by cold bending and forming with hot-rolled or cold-rolled galvanized strip or galvanized coil sheet and high frequency welding, or galvanized square pipes made by hot dipping and galvanizing. 镀锌脚手架的分类

Classification of galvanized square tubes

无锡镀锌脚手架从生产工艺上是分为热镀锌脚手架和冷镀锌脚手架的。正是由于这两种镀锌脚手架的加不相同也就造就了它们很多不同的物理和化学性质。总的来说它们在强度、韧性和机械性能方面都有很多的区别。

Wuxi galvanized square pipe is divided into hot galvanized square pipe and cold galvanized square pipe in terms of production technology. It is precisely because of the different addition of these two galvanized square tubes that they have many different physical and chemical properties. Generally speaking, they differ in strength, toughness and mechanical properties.

热镀锌脚手架

Hot-dip galvanized square tube

热镀锌脚手架:是在使用钢板或者是钢带卷曲成型后焊接制成的脚手架,并在这种脚手架的基础上将脚手架置于热镀锌池中经过一系列化学反响有形成的一种脚手架。热镀锌脚手架的生产工艺较为简答,但是生产效率是很高的,品种规格也多,但这种脚手架所需要的设备和资金很少,和适合小型镀锌脚手架厂家的生产。但是从强度上来说这种钢管的强度是远远低于无缝脚手架的。

Hot-dip galvanized square pipe: a square pipe made by welding steel plate or steel strip after coiling and forming. On the basis of this square pipe, square pipe is placed in hot-dip galvanized pool and formed through a series of chemical reactions. Hot-dip galvanized square pipe production process is relatively simple, but the production efficiency is very high, variety specifications are also many, but this kind of square pipe requires little equipment and funds, and suitable for small-scale galvanized square pipe manufacturers. But in terms of strength, the strength of this kind of steel pipe is far lower than that of seamless square pipe.

冷镀锌脚手架

Cold Galvanized Square Pipe

而冷镀锌脚手架是在所用的脚手架上利用冷镀锌的原理来使脚手架具有防腐蚀的性能。与热镀锌不同冷镀锌涂料主要通过电化学原理来进行防腐,因此必须保证锌粉与钢材的充分接触,产生电极电位差,所以钢材表面处理很重要。

The cold galvanized square pipe is used to make the square pipe have anti-corrosion performance by using the principle of cold galvanizing. Different from hot-dip galvanizing, cold-dip galvanizing coatings are mainly anti-corrosion based on electrochemical principle. Therefore, it is necessary to ensure full contact between zinc powder and steel to produce electrode potential difference, so surface treatment of steel is very important.

冷、热镀锌脚手架的区别

Differentiation between cold galvanized square tubes and hot galvanized square tubes

镀锌脚手架有热镀锌脚手架和冷镀锌脚手架两大类。热镀锌脚手架有湿法、干法、铅锌法、氧化还原法等。不同热镀锌方法的主要区别在钢管酸浸清洗后,用什么方法活化管体表面提高镀锌质量。现生产中主要采用干法和氧化还原法,其特点见表。

Galvanized square tubes can be divided into hot galvanized square tubes and cold galvanized square tubes. Hot-dip galvanized square pipe has wet method, dry method, lead-zinc method, oxidation-reduction method and so on. The main difference between different hot-dip galvanizing methods is how to activate the surface of pipe body to improve galvanizing quality after acid leaching cleaning. Dry process and redox process are mainly used in production, and their characteristics are shown in table.

冷镀锌的锌层表面十分光滑致密、组织均匀;具有良好的力学性能和抗腐蚀能力;锌耗比热镀锌低60%~75%。电镀锌在技术上有一定的复杂性,但对单面镀层,内外表面镀层厚度不同的双面镀层,以及薄壁管镀锌等皆须采用此法。

The surface of cold galvanized zinc coating is smooth, compact and uniform in structure. It has good mechanical properties and corrosion resistance. The consumption of zinc is 60%-75% lower than that of hot galvanized zinc. Zinc plating is technically complicated, but it is necessary to use this method for single-sided coating, double-sided coating with different thickness of inner and outer surface coating, and thin-walled tube galvanizing.

  日常使用的脚手架有哪些种类和特点?日常使用的脚手架有哪些种类和特点?扣件式1、优点1)承载力较大。当脚手架的几许尺寸及结构符合规范的有关要求时,一般状况下,脚手架的单管立柱的承载力可达15kN~35kN(1.5tf~3.5tf,规划值)。2)装拆便利,搭设灵活。…
辛苦整理!转载请注明来自 http://www.wuxidongfang.com/jiaoshoujiazhishi/60.html

你觉得这篇[镀锌脚手架之热度与冷镀的区别在哪里?]文章怎么样?

0 0
网友评论

管理员

该内容暂无评论

美国网友

推荐资讯