The cleaning of centrifugal fan is a very important work for its maintenance and maintenance. What are the precautions when cleaning the whole centrifugal fan? This is the next issue we will explain for you, please see the following specific elaboration: centrifugal fan in the environment for a period of time, each gap or parts surface will accumulate a layer of dirt, in order not to affect the normal use of centrifugal fan, the fan shell and bearing box need to be removed for thorough cleaning.
If these two parts of the centrifugal fan are not disassembled first, the whole cleaning of the whole fan can not be completed; secondly, in the cleaning process, we need to pay special attention to the fact that the motor directly connected to the fan can not be disassembled and cleaned in order to prevent the mechanical failure of motor burning.
After cleaning the whole centrifugal fan, it is necessary to assemble the parts. Firstly, a pair of oblique cushion iron pads are used and laid on the foundation. Secondly, whether cleaning or assembling the centrifugal fan, the adjusting mechanism is tested first to check the flexibility of its rotation.
Therefore, when disassembling and assembling centrifugal fans, we should start with those key points. Only by paying attention to these key points can we ensure the accuracy of actual disassembly work, reduce the possibility of problems occurring in assembly after cleaning work, ensure that users can use the fans normally, and ensure that production work is not affected.
标签:   离心风机 脚手架 移动脚手架 脚手架厂家 梯形脚手架 门式脚手架