无锡科达移动脚手架厂家【官网】生产:【移动脚手架】【门式脚手架】【梯形脚手架

无锡科达【移动脚手架】生产厂家

示例图片三
网站首页 > 新闻资讯 > 移动脚手架

移动式脚手架的八个使用特点

1.移动式脚手架具有多功用性:可以依据详细的施工请求,组成不一样的组架尺度、形状和承载才能的单、双排脚手架,支持架,支持柱等多种功用的施工装备。

1. Mobile scaffolding has many functions: according to the detailed construction requirements, it can be composed of single-row and double-row scaffolding with different dimensions, shapes and bearing capacity, support frame, support column and other functions of construction equipment.

2.具有高成效:构造简略、拆装简洁、迅速,彻底避免了螺栓工作和零星扣件的丢损,接头组装拆速度比惯例块5倍以上,拼拆迅速省力,工人用一把铁锤即可完结全部工作。

2. High efficiency: simple structure, simple disassembly and rapid, thoroughly avoid bolt work and the loss of sporadic fasteners, joint assembly and disassembly speed than the conventional block more than five times, quick disassembly and labor saving, workers with a hammer can complete all the work.

3.具有承载力大:立杆衔接是同轴心承插,节点在构造平面内,接头具有抗弯、抗剪、抗扭力学性能,构造安稳,承载力大。

3. It has large bearing capacity: the connection of the vertical bar is a coaxial socket, the joint is in the structural plane, the joint has bending, shear, torsional mechanical properties, structural stability, bearing capacity.

4.具有安全可靠性:接头设计时考虑到自重力的效果,使接头具有可靠的双向自锁才能,效果于横杆上的荷载经过盘扣传递给立杆,盘扣具有很强的抗剪才能(最大为199KN)。

4. Safety and reliability: the joint design considers the effect of self-gravity, so that the joint has a reliable two-way self-locking ability, the effect of the load on the transverse bar is transferred to the vertical bar through the disc buckle, disc buckle has a strong ability to resist shear (the maximum is 199KN).

5.商品标准化包装,修理少、装卸便利、运送便利、易寄存。

5. commodity standardization packaging, less repair, convenient handling, convenient transportation, easy to deposit.

6.盘扣式脚手架使用寿命比扣件脚手架高许多,通常可以用10年以上,因为扔掉了螺栓衔接。构件经碰耐磕.就算锈蚀不影响拼拆使用。

6. The service life of disc-and-button scaffolding is much longer than that of fastener scaffolding. It can usually be used for more than 10 years because the bolts are thrown away. The structure is resistant to knock. Even if rust does not affect the use of assembly and disassembly.

7.具有早拆功用:横杆可提早拆下周转,节约资料,节约木方,节约人工。真正做到节能环保,经济、实用。

7. has the function of early dismantling: the cross bar can remove the turnover early, save data, save wood and save labor. Truly energy saving, environmental protection, economic and practical.

8、实践中表明,作为梁跨度在15m以内,净空层高度在12m以下的单跨、多跨连续梁、构造构造房子模板支持体系,其安稳性和安全性好于碗扣式脚手架,优于门式脚手架

8. Practice shows that as a single-span, multi-span continuous beam with a span of less than 15 m and a height of less than 12 m, the formwork supporting system of a building is constructed, and its stability and safety are better than that of a bowl-buckle scaffold and better than that of a portal scaffold.


标签:   脚手架 移动脚手架 门式脚手架