无锡科达移动脚手架厂家【官网】生产:【移动脚手架】【门式脚手架】【梯形脚手架

无锡科达【移动脚手架】生产厂家

示例图片三
网站首页 > 新闻资讯 > 脚手架厂家

厂家介绍移动脚手架的应用及特点【宝典】

移动脚手架应用于室,内外装修,门面广告,桥梁支撑,模板支撑,满堂脚手架,墙壁脚手架等用途,具有装卸方便,可靠,价惠实用等优点。移动脚手架优点:

Mobile scaffolding is used for indoor, interior and exterior decoration, facade advertising, bridge support, formwork support, full-room scaffolding, wall scaffolding and other purposes, with the advantages of convenient loading and unloading, reliable, affordable and practical. The advantages of mobile scaffolding are:

1、多功能:能根据具体施工要求,组成不同组架尺寸,形状和承载能力的单,双排脚手架,支撑架,支撑柱,物料提升架,爬升脚手架,悬挑架等多种功能的施工装备。也可用于搭设施工棚,料棚,灯塔等构筑物。特别适合于搭设曲面脚手架和重载支撑架。

1. Multifunction: According to the specific construction requirements, can compose different size, shape and bearing capacity of single, double row scaffolding, support frame, support column, material lifting frame, climbing scaffolding, suspension and other functional construction equipment. It can also be used for building construction shed, material shed, lighthouse and other structures. It is especially suitable for erection of curved scaffolds and heavy load supporting frames.

2、通用性强:主构件均采用普通的扣件式钢管脚手架之钢管,可用扣件同普通钢管连接,通用性强。

2. Strong versatility: The main components are made of steel pipes of common fastener-type steel pipe scaffolding, which can be connected with common steel pipes by fasteners, and have strong versatility.

3、便于管理:构件系列标准化,构件外表涂以橘黄色。美观大方,构件堆放整齐,便于现场材料管理,满足文明施工要求。

3, easy to manage: the component series is standardized, and the components are coated with orange. It is beautiful and generous, and the components are stacked neatly, which is convenient for on-site material management and meets the requirements of civilized construction.

4、承载力大:立杆连接是同轴心承插,横杆同立杆靠碗扣接头连接,接头具有可靠的抗弯,抗剪,抗扭力学性能。而且各杆件轴心线交于一点,节点在框架平面内,因此,结构稳固可靠,承载力大。

4. Large bearing capacity: vertical bar connection is coaxial insertion, horizontal bar and vertical bar are connected by bowl buckle joint, joint has reliable bending, shear, torsional mechanical properties. Moreover, the axial line of each member intersects at one point, and the joints are in the plane of the frame. Therefore, the structure is stable and reliable, and the bearing capacity is large.

5、可靠:接头设计时,考虑到上碗扣螺旋摩擦力和自重力作用,使接头具有可靠的自锁能力。作用于横杆上的荷载通过下碗扣传递给立杆,下碗扣具有很强的抗剪能力(*大为199kN)。上碗扣即使没被压紧,横杆接头也不致脱出而造成事故。同时配备有网支架,间横杆,脚手板,挡脚板,架梯。挑粱.连墙撑等杆配件,使用可靠。

5. Reliability: When designing the joint, considering the screw friction and self-gravity of the upper bowl buckle, the joint has reliable self-locking ability. The load acting on the transverse bar is transmitted to the vertical bar through the lower bowl buckle, which has a strong shear resistance (* 199kN). Even if the bowl buckle is not pressed, the cross bar joint will not break out and cause an accident. At the same time, it is equipped with mesh support, cross bar, footboard, foot rest and scaffolding. It is reliable to use beams and braces.

6、维修少:该脚手架构件消除了螺栓连接,构件经碰耐磕,一般锈蚀不影响拼拆作业,不需特殊养护,维修。

6. Less maintenance: The scaffolding eliminates bolt connection, and the components are resistant to knocking after touching. Generally, rust does not affect the assembly and disassembly operation, and does not require special maintenance and maintenance.

7、高功效:常用杆件中*长为3130mm,重17。07kg。整架拼拆速度比常规快3~5倍,拼拆快速省力,工人用一把铁锤即可完成全部作业,避免了螺栓操作带来的诸多不便。

7, high efficiency: the rod length is 3130mm and the weight is 17. 07kg. The whole frame is assembled and disassembled 3-5 times faster than the conventional one. The disassembly is fast and labor-saving. The worker can complete all the work with a hammer, avoiding the inconvenience caused by bolt operation.


标签:   脚手架厂家 移动脚手架 脚手架 门式脚手架